How To Reboot Windows Xp Without Disk

How to Setup Windows XP from USB drive?

You are here:  Tutorials > How to setup Windows XP from USB drive?

Step1: Creating Rescue USB Drive

Starting time, nosotros need create a rescue USB bulldoze which can kick the calculator. Delight follow the steps,

1. Run PowerISO rescue media utility. You tin can download it here. On Windows Vista or to a higher place operating organization, y'all may need confirm the UAC dialog to go on.

2. Insert the USB drive you lot intend to boot from.

3. The utility will let y'all cull Windows PE compages and version. Information technology is suggested to select 32-bit compages and Windows PE 3.11. Click "Next" to go along.
   
   

4. Select USB drive for output device, and select the correct drive from the list. Click "Side by side" to continue.
   

5. The utility will starting time creating rescue USB bulldoze. Information technology will check necessary component and automatically download missing component from the server.

   Please notice that all existing data on the USB drive volition be destroyed during this step. The program will alert y'all before writing the USB drive. Click "OK" to continue.

   

6. When it'south washed, re-create the Windows XP setup files to the USB bulldoze. Delight note that y'all'll only demand the i386 binder.

If no errors occurred in the above process, you should at present exist all set to setup Windows XP from USB drive!

Step ii: Configuring the BIOS

You lot should now reboot and go into the BIOS configuration to boot from USB. Instructions for doing so vary wildly from system to organisation, merely generally entail the following:

1. Reboot the organisation.

2. While booting (before Windows starts loading), get into the BIOS configuration screen by hitting something like F1, F2, Delete or Escape. Hotkey instructions are by and large provided on the screen.

3. Go to the section that contains your boot devices.

4. With your USB drive plugged in, the USB drive should be listed. If information technology isn�t, your system might non support booting from USB. Assuming that information technology is supported (equally is the case with almost all modern hardware), promote your USB drive to the primary boot device.

5. Go out from the BIOS configuration, saving all changes.

Delight notice that you can seriously screw upwardly your system by providing incorrect BIOS settings!

Step 3: Booting from rescue USB drive

Assuming that y'all properly configured your BIOS and your USB drive supports booting, your computer should now boot from the the rescue USB drive. Depending on the speed of your USB drive, this may take a while.

If it isn�t working, then double-bank check the following before making a scene:

• Is your BIOS properly configured for booting from the USB device? (Is the USB device listed and does it have top priority?)

• Take y'all correctly prepared the USB drive in pace one? (Restart the procedure.)

• Does your USB drive properly back up existence booted from? (Try some other ane!)

Footstep 4: Prepping the Difficult Disk

You need to make sure that your hard drive is partitioned and formatted properly. Especially if you've had Linux or another operating system on information technology, you'll need to repartition and format information technology. The rescue drive incorporate file manager and control line utility. Y'all can launch DiskPart for disk partitioning and formatting from the command utility.

If you are sure that your difficult drive is ready properly (i.e. it has only run Windows, information technology contains a valid FAT or NTFS sectionalisation) and so you lot tin rubber yourself the hassle and skip this step.

Window XP doesn't support GPT partition. If your difficult drive is partitioned in GPT mode, yous also demand repartition and format the disc.

To repartition and format (This process volition destroy any data on the hard drive):

1. Click the icon on job bar to launch a command line Window.

2. Enter DiskPart to run the built-in disk direction utility.

3. Enter the commands needed to repartition and format your drive. For example, effort the following:

select disk 0 (select the first disk. On your computer, disk 0 may not be the correct disk, you lot tin employ "listing deejay" to find the correct disk.)

make clean (purges the unabridged drive, substantially resetting it)

create partition primary (creates a single partition from the unabridged deejay)

select partition1 (select the division created)

format fs=ntfs quick (format the partition to NTFS organization, and practice a chop-chop format)

assign (assign the partition a drive letter)

exit (quits DiskPart).

Stride 5: Launching Windows XP Setup from USB drive

With your bulldoze all gear up, you can at present launch the Windows XP setup with a few custom parameters. Allow'due south assume that the files are available at E:\i386.

Plugging in a device now won�t work. Retrieve that all USB devices volition need to be plugged in right from the start while using the rescue drive.

Run the following control:

1. Run E:\i386\winnt32.exe /syspart:C: /tempdrive:C: /makelocalsource. Replace C: with the drive y'all desire to install Windows to.

2. Proceed with the installation. If asked to convert the installation volume to NTFS, answer No. The setup program incorrectly believes that your USB drive (if is formatted as FAT) needs conversion.

The setup program will and so silently shut, which might make you think that something went wrong. Don't worry though.

Pace half-dozen: Continue Windows XP Setup from Hard disk

1. Reboot your system.

2. Unplug USB bulldoze during postal service phase.

3. Alter your BIOS settings back to boot from hard disk drive again as needed.

4. Yous can now continue to finish setting upward Windows XP.

Note: The above guide works with Windows XP only. For Windows ten, Windows 7, Windows eight / 8.one, or Windows Vista operating systems, delight refer to some other guide at http://www.poweriso.com/tutorials/how-to-make-win7-bootable-usb-drive.htm .

Copyright 2004-2022 Power Software Ltd. All rights reserved.

Source: https://poweriso.com/tutorials/how-to-make-winxp-bootable-usb-drive.htm

Posted by: andrewsfiltaked.blogspot.com

Share this post